Exmark Turf Tracer S-Series Walk-Behind Lawn Mowers
Exmark Turf Tracer S-Series Walk-Behind Lawn Mowers


Features & Specs

  • New Electric Clutch
  • Semi-pneumatic Front Caster Tires Virtually Eliminate Tire Repair
  • Hour Meter Comes Standard
  • Patented Enhanced Control System
  • Propane Option
  • Floating Deck
Available Deck Sizes:

Make
Exmark
Model Turf Tracer S-Series
Engine Power 603 cc/674 cc
Engine Kawasaki/Kohler
Drivetrain Hydro-Drive
Fuel Capacity 5 gallons
Operating Speed 0-6.2 mph forward, 0-2.2 mph reverse
Mowing Height Range 1.5" - 4.5" in 0.5" increments
Warranty 1 year limited
Average Rating
Please Call For Pricing
407-240-1023

Variations

36 inch deck
Kawasaki 603 cc Gasoline Engine
TTS481CKA36300
See All Specs
48 inch deck
Kawasaki 603 cc Gasoline Engine
TTS481GKA48300
See All Specs
52 inch deck
Kawasaki 603 cc Gasoline Engine
TTS541GKA52300
See All Specs
48 inch deck
Kawasaki 603 cc Gasoline Engine
TTS600GKA483E0
See All Specs
52 inch deck
Kawasaki 603 cc Gasoline Engine
TTS600GKA523E0
See All Specs
48 inch deck
Kohler 674 cc Propane Engine
TTS680PKC483E0
See All Specs


Turf Tracer S-Series

Made-to-order performance in a floating-deck, hydro-drive mower. 

With the Exmark Turf Tracer S-Series, you can choose from four rugged engines including the eco-friendly, Electronic Fuel Injection (EFI), propane Kohler® PCV680. Then, match that power to cutting decks ranging from 36 to 52 inches. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.


Electric Clutch New Electric Clutch
 Proven to be among the most durable and reliable in the business, Exmark’s  superior electric clutch technology allows for easier and faster belt servicing.
 
Forget Flats Forget Flats
 Standard 9” x 3.5-4” smooth-tread, semi-pneumatic front caster tires virtually  eliminate tire repair.
 
Standard Hour Meter Hour Meter Comes Standard
 Improve maintenance records and track service intervals for longer life.
 
Enhanced Control System Patented Enhanced Control System (ECS)
 Recent university tests showed landscape professionals prefer our control  system to all others on the market.
 
Propane Propane
 An eco-friendly, lower cost fuel reduces operating expenses versus typical
 gas-powered mowers.
 
Floating Deck Floating Deck
 Full-floating UltraCut™ deck. Side discharge standard, with molded discharge  chute and option to bag or mulch.

Specifications for model # TTS481CKA36300

Decks
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Blades 2 Blades at 18.00" Length
Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 36"
Dimensions
Curb Weight 573
Width 47.5 in. (120.7 cm)
Length 77.7 in. (197.4 cm)
Height 42.0 in. (106.7 cm)
Equipment
Casters .38" thick caster yoke arms
Cup Holder No
Drive Tires 16 x 6.5-8, 4-ply Turf Master®
Drive Wheel Release Allows unit movement without engine running.
Electrical No battery, recoil start w/ 5 amp clutch coil
Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated mechanical compression.
Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Power Components
Air Filter Standard Engine Manufacturer's air filter
Carb Compliant Yes
Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
Drive Hydro-Drive
Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.
Engine Brand Kawasaki®
Engine Displacement 603
Engine Model FS481V
Engine Series V-Twin
Engine Speed 3,600 rpm
Engine Type Carbureted
Fuel Capacity 5-gallon (18.9-L) fuel tank.
Fuel Indicator None
PTO Engagement Electromagnetic 105 ft-lbs clutch.
Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # TTS481GKA48300

Decks
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 16.25" Length
Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 48"
Dimensions
Curb Weight 586
Width 59.5in. (151.1 cm)
Length 73.7 in. (187.2 cm)
Height 42.0 in. (106.7 cm)
Equipment
Casters .38" thick caster yoke arms
Cup Holder No
Drive Tires 16 x 7.5-8, 4-ply Turf Master®
Drive Wheel Release Allows unit movement without engine running.
Electrical No battery, recoil start w/ 5 amp clutch coil
Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated mechanical compression.
Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Power Components
Air Filter Standard Engine Manufacturer's air filter
Carb Compliant No
Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
Drive Hydro-Drive
Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.
Engine Brand Kawasaki®
Engine Displacement 603
Engine Model FS481V
Engine Series V-Twin
Engine Speed 3,600 rpm
Engine Type Carbureted
Fuel Capacity 5-gallon (18.9-L) fuel tank.
Fuel Indicator None
PTO Engagement Electromagnetic 105 ft-lbs clutch.
Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # TTS541GKA52300

Decks
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.00" Length
Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Dimensions
Curb Weight 670
Width 64.3 in. (163.3 cm)
Length 75.9 in. (192.8 cm)
Height 42.0 in. (106.7 cm)
Equipment
Casters .38" thick caster yoke arms
Cup Holder No
Drive Tires 16 x 7.5-8, 4-ply Turf Master®
Drive Wheel Release Allows unit movement without engine running.
Electrical No battery, recoil start w/ 5 amp clutch coil
Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated mechanical compression.
Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Power Components
Air Filter Standard Engine Manufacturer's air filter
Carb Compliant No
Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
Drive Hydro-Drive
Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.
Engine Brand Kawasaki®
Engine Displacement 603
Engine Model FS541V
Engine Series V-Twin
Engine Speed 3,600 rpm
Engine Type Carbureted
Fuel Capacity 5-gallon (18.9-L) fuel tank.
Fuel Indicator None
PTO Engagement Electromagnetic 105 ft-lbs clutch.
Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # TTS600GKA483E0

Decks
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 16.25" Length
Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 48"
Dimensions
Curb Weight 606
Width 59.5 in. (151.1 cm)
Length 73.7 in. (187.2 cm)
Height 42.0 in. (106.7 cm)
Equipment
Casters .38" thick caster yoke arms
Cup Holder No
Drive Tires 16 x 7.5-8, 4-ply Turf Master®
Drive Wheel Release Allows unit movement without engine running.
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated mechanical compression.
Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Power Components
Air Filter Standard Engine Manufacturer's air filter
Carb Compliant No
Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
Drive Hydro-Drive
Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.
Engine Brand Kawasaki®
Engine Displacement 603
Engine Model FS600V
Engine Series V-Twin
Engine Speed 3,600 rpm
Engine Type Carbureted
Fuel Capacity 5-gallon (18.9-L) fuel tank.
Fuel Indicator None
PTO Engagement Electromagnetic 105 ft-lbs clutch.
Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # TTS600GKA523E0

Decks
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.00" Length
Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Dimensions
Curb Weight 690
Width 64.3 in. (163.3 cm)
Length 75.9 in. (192.8 cm)
Height 42.0 in. (106.7 cm)
Equipment
Casters .38" thick caster yoke arms
Cup Holder No
Drive Tires 16 x 7.5-8, 4-ply Turf Master®
Drive Wheel Release Allows unit movement without engine running.
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated mechanical compression.
Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Power Components
Air Filter Standard Engine Manufacturer's air filter
Carb Compliant No
Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
Drive Hydro-Drive
Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.
Engine Brand Kawasaki®
Engine Displacement 603
Engine Model FS600V
Engine Series V-Twin
Engine Speed 3,600 rpm
Engine Type Carbureted
Fuel Capacity 5-gallon (18.9-L) fuel tank.
Fuel Indicator None
PTO Engagement Electromagnetic 105 ft-lbs clutch.
Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # TTS680PKC483E0

Decks
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 16.25" Length
Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 48"
Dimensions
Curb Weight 741
Width 59.5 in. (151.1 cm)
Length 73.7 in. (187.2 cm)
Height 42.0 in. (106.7 cm)
Equipment
Casters .38" thick caster yoke arms
Cup Holder No
Drive Tires 16 x 7.5-8, 4-ply Turf Master®
Drive Wheel Release Allows unit movement without engine running.
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated mechanical compression.
Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Power Components
Air Filter Standard Engine Manufacturer's air filter
Carb Compliant Yes
Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
Drive Hydro-Drive
Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.
Engine Brand Kohler®
Engine Displacement 674
Engine Model PCV680
Engine Series Command™ EFI
Engine Speed 3,600 rpm
Engine Type EFI Propane
Fuel Capacity 7.9-Gallon Propane Tank
Fuel Indicator Yes - Float Gauge
PTO Engagement Electromagnetic 125 ft-lbs clutch.
Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
Fuel Type Propane EFI

Contact Us About This Turf Tracer S-Series

†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.