Exmark Lazer Z E-Series Zero-Turn Lawn Mowers
Exmark Lazer Z E-Series Zero-Turn Lawn Mowers


Features & Specs

  • Simplified Hydro Drive
  • Unibody Frame
  • Less Time At The Pump
  • On-Board Diagnostics
  • Fewer Grease Points
  • UltraCut Series 4 Deck
  • Rear Discharge Deck (60" and 72" Deck)
  • Tool-less Belt Removal
Available Deck Sizes:

Make
Exmark
Model Lazer Z E-Series
Engine Power 603 cc/726 cc/747 cc
Engine Kawasaki/Kohler
Drivetrain Hydro-Drive
Fuel Capacity 8 gallons
Operating Speed 0-8.0 mph forward, 0-6.0 mph reverse
Mowing Height Range 1.0" to 5.5" in 0.25" increments
Warranty 1 year limited
Average Rating
Please Call For Pricing
407-240-1023

Variations

48 inch deck
Kawasaki 603 cc Gasoline Engine
LZE600GKA484A2
See All Specs
60 inch deck
Kawasaki 726 cc Gasoline Engine
LZE730GKA604A3
See All Specs
60 inch deck
Kawasaki 726 cc Gasoline Engine
LZE730GKA60RA1
See All Specs
60 inch deck
Kohler 747 cc Gasoline Engine
LZE740EKC60400
See All Specs
52 inch deck
Kohler 747 cc Gasoline Engine
LZE742GKC524A2
See All Specs
72 inch deck
Kohler 747 cc Gasoline Engine
LZE749EKC72RA1
See All Specs
60 inch deck
Kawasaki 726 cc Gasoline Engine
LZE730GKA604B3
See All Specs
60 inch deck
Kohler 747 cc Gasoline Engine
LZE742GKC604A3
See All Specs
52 inch deck
Kohler 747 Gasoline Engine
LZE732GKC524A2
See All Specs


Lazer Z E-Series

The definition of value. 

The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z, but in a value package. Features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to a full-floating, UltraCut™ Series 4 cutting deck. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort.


Simplified Hydro Drive Hydro Drive, Simplified
 Our hydro drive system has no hoses to leak and just one easy-to-change belt.  Only simple, annual maintenance is required. It also lowers the center of gravity  for improved handling.
 
Unibody Frame Unibody Frame
 Our one-piece body frame is a classic case of “less is more.” Because, fewer  parts equal more strength. And, more durability. So, in the interest of accuracy,  the Lazer Z’s unibody frame is actually a case of “less is way more.”
 
Less Time At The Pump Less Time At The Pump
 Gas-powered E-Series models have a single 8-gallon tank with one fill location.
 
On-Board Diagnostics On-Board Diagnostics
 Check vital functions at a glance on the digital screen. An electronic fuel gauge  with low fuel warning on all Lazer Z units, battery voltage warning, hour meter  and OPC safety switch monitoring make troubleshooting easy.
 
Fewer Grease Points Fewer Grease Points
 With just four grease points that only need annual greasing, the Lazer Z delivers  maximum performance with minimum maintenance. Greaseless spindles and  only four grease points on the entire machine.
 
UltraCut Series 4 Deck UltraCut Series 4 Deck
 This full-floating deck uses maintenance free spindle with a splined blade driver  to stop bolt tightening on impacts. And, our patented bearing design on idler  arm pivots only needs annual service.
 
Rear Discharge Deck Rear Discharge Deck
 Available in 60 and 72 inch cutting widths, the rear discharge deck offers  increased clipping discharge control, reduced noise, and the ability to trim on  both sides of the cutting deck while keeping the operator clean.
 
Tool-less Belt Removal Tool-less Belt Removal
 Deck and hydro belt can be installed without using any tools.

Specifications for model # LZE600GKA484A2

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 16.25" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded with 7-gauge side skirt.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 48"
Dimensions
Height 70 in. (177.8 cm)
Length 79.2 in. (201.2 cm)
Width 59.6 in. (151.4 cm)
Curb Weight 1044
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 9.50-12, 4 ply Super Turf®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 603
Engine Model FX600V
Engine Series V-Twin
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop Electromagnetic 175 ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZE730GKA604A3

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Super Turf®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.50-6, smooth-tread, pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 726
Engine Model FX730V
Engine Series V-Twin
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Standard
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZE730GKA60RA1

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 87.2 in. (221.5cm)
Width 66.2 in. (168.1 cm)
Curb Weight 1240
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Super Turf®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 726
Engine Model FX730V
Engine Series V-Twin
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZE740EKC60400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (14.0 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight 1115
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Super Turf®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Mower Size full
Parking Brake Lever-actuated disc brake.
Seat Two tone bolstered seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model ECV740
Engine Series Command™ EFI
Engine Speed 3,750 rpm
Engine Type Electronic Fuel Injected
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas EFI

Specifications for model # LZE742GKC524A2

Decks
Width / Cutting Deck 52"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 18.00" Length
Dimensions
Curb Weight 1076
Length 79.2 in. (201.2 cm)
Width 64.8 in. (164.6 cm)
Height 70 in. (177.8 cm)
Equipment
Mower Size full
Electrical 12-volt battery with 15-amp alternator.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Parking Brake Lever-actuated disc brake.
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Power Components
Engine Brand Kohler®
Engine Displacement 747
Engine Type Carbureted
Engine Speed 3,750 rpm
Air Filter Heavy-duty canister air filtration system
Engine Series Command™
Fuel Indicator Yes - electronic Sender
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Engine Model CV742
Drive Hydro-Drive
Fuel Type Gas Carbureted
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Casters .50" thick caster yoke arms.
ROPS 2-post foldable ROPS standard with seat belt and latch.
Drive Wheel Release Allows unit movement without engine running.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake

Specifications for model # LZE749EKC72RA1

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 24.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Width / Cutting Deck 72"
Dimensions
Height 70 in. (177.8 cm)
Length 87.2 in. (221.5cm)
Width 78.2 in. (198.6 cm)
Curb Weight 1288
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Super Turf®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model ECV749
Engine Series Command™ EFI
Engine Speed 3,750 rpm
Engine Type Electronic Fuel Injected
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas EFI

Specifications for model # LZE730GKA604B3

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Super Turf®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.50-6, smooth-tread, pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Seat Isolation System for reduced vibration, to enhance ride of standard seat.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 726
Engine Model FX730V
Engine Series V-Twin
Engine Speed 3,700 rpm
Engine Type Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Standard
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZE742GKC604A3

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight 1147
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Super Turf®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.50-6, smooth-tread, pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Seat Isolation System for reduced vibration, to enhance ride of standard seat.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model CV742
Engine Series Command
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZE732GKC524A2

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.0" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Dimensions
Height 70 in. (177.8 cm)
Length 79.2 in. (201.2 cm)
Width 64.8 in. (164.6 cm)
Curb Weight 1076
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 9.50-12®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.50-6, smooth-tread, pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Seat Isolation System for reduced vibration, to enhance ride of standard seat.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model CV732
Engine Series Command
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Contact Us About This Lazer Z E-Series

†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.