Exmark Lazer Z S-Series Zero-Turn Lawn Mowers
Exmark Lazer Z S-Series Zero-Turn Lawn Mowers


Features & Specs

  • Propane Option
  • Less Time At The Pump
  • Built To Last
  • On-Board Diagnostics
  • Fewer Grease Points
  • UltraCut Series 4 Deck
  • Tool-less Belt Removal
Available Deck Sizes:

Make
Exmark
Model Lazer Z S-Series
Engine Power 726 cc/747 cc/749 cc/852 cc
Engine Kawasaki
Drivetrain Hydro-Drive
Fuel Capacity 12 gallons
Operating Speed 0-10.0 mph forward, 0-6.0 mph reverse
Mowing Height Range 1.0" to 5.5" in 0.25" increments
Warranty 1 year limited
Average Rating
Please Call For Pricing
407-240-1023

Variations

48 inch deck
Kawasaki 726 cc Gasoline Engine
LZS651CKA484A2
See All Specs
52 inch deck
Kohler 747 cc Gasoline Engine
LZS740EKC52400
See All Specs
52 inch deck
Kohler 747 cc Propane Engine
LZS740PKC52400
See All Specs
60 inch deck
Kohler 747 cc Propane Engine
LZS740PKC60400
See All Specs
72 inch deck
Kohler 747 cc Propane Engine
LZS740PKC72400
See All Specs
72 inch deck
Kohler 747 cc Gasoline Engine
LZS749AKC72400
See All Specs
60 inch deck
Kohler 747 cc Gasoline Engine
LZS749EKC60400
See All Specs
52 inch deck
Kawasaki 852 cc Gasoline Engine
LZS801GKA52400
See All Specs
60 inch deck
Kawasaki 852 cc Gasoline Engine
LZS801GKA60400
See All Specs
72 inch deck
Kawasaki 852 cc Gasoline Engine
LZS801GKA72400
See All Specs


Lazer Z S-Series

More power. More features. More productivity. 

With the S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-gauge, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.


Doing More With Propane  Doing More With Propane
 Our EFI system optimizes fuel delivery in real-time, which improves efficiency  and performance. This, in combination with lower propane cost reduces  operating expenses versus typical gas-powered mowers.
 
Less Time At The Pump Less Time At The Pump
 Gas-powered E-Series models have a single 8-gallon tank with one fill location.
 
Built To Last Built To Last
 Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a  7-gauge side skirt. All with welded spindle mounting sites. And, full-floating,
 4-point suspension with four adjustable anti-scalp rollers.
 
On-Board Diagnostics On-Board Diagnostics
 Check vital functions at a glance on the digital screen. An electronic fuel gauge  with low fuel warning on all Lazer Z units, battery voltage warning, hour meter  and OPC safety switch monitoring make troubleshooting easy.
 
Fewer Grease Points Fewer Grease Points
 With just four grease points that only need annual greasing, the Lazer Z delivers  maximum performance with minimum maintenance. Greaseless spindles and  only four grease points on the entire machine.
 
UltraCut Series 4 Deck UltraCut Series 4 Deck
 This full-floating deck uses maintenance free spindle with a splined blade driver  to stop bolt tightening on impacts. And, our patented bearing design on idler  arm pivots only needs annual service.
 
Tool-less Belt Removal Tool-less Belt Removal
 Deck and hydro belt can be installed without using any tools.

Specifications for model # LZS651CKA484A2

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 16.25" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 48"
Dimensions
Height 70 in. (177.8 cm)
Length 79.2 in. (201.2 cm)
Width 59.6 in. (151.4 cm)
Curb Weight 1142
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant Yes
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 726
Engine Model FX651V
Engine Series V-Twin
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZS691CKA52400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.00" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Dimensions
Height 70 in. (177.8 cm)
Length 79.2 in. (201.2 cm)
Width 64.8 in. (164.6 cm)
Curb Weight 1104
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant Yes
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 726
Engine Model FX691V
Engine Series V-Twin
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZS740EKC52400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.00" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Dimensions
Height 70 in. (177.8 cm)
Length 79.2 in. (201.2 cm)
Width 64.8 in. (164.6 cm)
Curb Weight 1131
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model ECV740
Engine Series Command™ EFI
Engine Speed 3,750 rpm
Engine Type Electronic Fuel Injected
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas EFI

Specifications for model # LZS740PKC52400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.00" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Dimensions
Height 70 in. (177.8 cm)
Length 79.2 in. (211.1 cm)
Width 64.8 in. (184.9 cm)
Curb Weight 1307
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant Yes
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model PCV740
Engine Series Command™ EFI Propane
Engine Speed 3,750 rpm
Engine Type EFI Propane
Fuel Capacity 10.3-gallon Propane tank
Fuel Indicator Yes - Float Gauge
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Propane EFI

Specifications for model # LZS740PKC60400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight 1283
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Turf Master®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant Yes
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model PCV740
Engine Series Command™ EFI Propane
Engine Speed 3,750 rpm
Engine Type EFI Propane
Fuel Capacity 10.3-gallon Propane tank
Fuel Indicator Yes - Float Gauge
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Propane EFI

Specifications for model # LZS740PKC72400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 24.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 72"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 84.9 in. (215.6 cm)
Curb Weight
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Turf Master®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.5-6; smooth-tread, semi-pneumatic
Parking Brake Lever-actuated disc and caliper.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant Yes
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model PCV740
Engine Series Command™ EFI Propane
Engine Speed 3,750 rpm
Engine Type EFI Propane
Fuel Capacity 10.3-gallon Propane tank
Fuel Indicator Yes - Float Gauge
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Propane EFI

Specifications for model # LZS742CKC60400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight 1164
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Turf Master®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant Yes
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model CV742
Engine Series Command™
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZS749AKC72400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 24.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 72"
Dimensions
Height 70 in. (177.8 cm)
Length 86.1 in. (218.7 cm)
Width 84.9 in. (215.6 cm)
Curb Weight 1220
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, Turf Master®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant Yes
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 749
Engine Model ECV749
Engine Series Command™ EFI
Engine Speed 3,750 rpm
Engine Type Electronic Fuel Injected
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas EFI

Specifications for model # LZS749AKC724A1

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 24.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 72"
Dimensions
Height 70 in. (177.8 cm)
Length 86.1 in. (218.7 cm)
Width 84.9 in. (215.6 cm)
Curb Weight 1305
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Turf Master®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant Yes
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 749
Engine Model ECV749
Engine Series Command™ EFI
Engine Speed 3,750 rpm
Engine Type Electronic Fuel Injected
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas EFI

Specifications for model # LZS749EKC60400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight 1177
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Turf Master®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model ECV749
Engine Series Command™ EFI
Engine Speed 3,750 rpm
Engine Type Electronic Fuel Injected
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas EFI

Specifications for model # LZS749EKC604A1

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight 1176
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Turf Master®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model ECV749
Engine Series Command™ EFI
Engine Speed 3,750 rpm
Engine Type Electronic Fuel Injected
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas EFI

Specifications for model # LZS801GKA52400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.00" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Dimensions
Height 70 in. (177.8 cm)
Length 79.2 in. (201.2 cm)
Width 64.8 in. (164.6 cm)
Curb Weight 1110
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 852
Engine Model FX801V
Engine Series V-Twin
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZS801GKA524A2

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.00" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Dimensions
Height 70 in. (177.8 cm)
Length 79.2 in. (201.2 cm)
Width 64.8 in. (164.6 cm)
Curb Weight 1134
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Model FX801V
Engine Type Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZS801GKA60400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight 1177
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Turf Master®
Electrical 12-volt battery with 20-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 852
Engine Model FX801V
Engine Series V-Twin
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZS801GKA604A1

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight 1197
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Turf Master®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Model FX801V
Engine Type Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZS801GKA72400

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 24.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 72"
Dimensions
Height 70 in. (177.8 cm)
Length 86.1 in. (218.7 cm)
Width 84.9 in. (215.6 cm)
Curb Weight 1208
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Turf Master®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 852
Engine Model FX801V
Engine Series V-Twin
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # LZS801GKA724A1

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 24.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 72"
Dimensions
Height 70 in. (177.8 cm)
Length 86.1 in. (218.7 cm)
Width 84.9 in. (215.6 cm)
Curb Weight 1263
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12-12, 4 ply Turf Master®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 6.5-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14.5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Model FX801V
Engine Type Carbureted
Engine Displacement 852
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Contact Us About This Lazer Z S-Series

†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.