Exmark Lazer Z X-Series Zero-Turn Lawn Mowers
Exmark Lazer Z X-Series Zero-Turn Lawn Mowers


Features & Specs

  • RED Technology
  • UltraCut Series 6 Deck
  • Iso-Mount Seat Isolation System 
  • Productivity
  • Tool-less Belt Removal
Available Deck Sizes:

Make
Exmark
Model Lazer Z X-Series
Engine Power 747 cc/852 cc/999 cc
Engine Kohler/Kawasaki
Drivetrain Hydro-Drive
Fuel Capacity 12 gallons
Operating Speed 0-10.0 mph forward, 0-6.0 mph reverse
Mowing Height Range 1.0" to 5.5" in 0.25" increments
Warranty 1 year limited
Average Rating
Please Call For Pricing
407-240-1023

Variations

52 inch deck
Kohler 747 cc Gasoline Engine
LZX740EKC526T0
See All Specs
60 inch deck
Kawasaki 852 cc Gasoline Engine
LZX801GKA60600
See All Specs
60 inch deck
Kohler 999 cc Gasoline Engine
LZX940EKC606T0
See All Specs
72 inch deck
Kohler 999 cc Gasoline Engine
LZX980EKC726T0
See All Specs
60 inch deck
Kawasaki 852 cc Gasoline Engine
LZX801GKA606B1
See All Specs


Lazer Z X-Series

What you get when you check all the boxes. 

And with our top-of-the-line Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.


RED Technology Patented RED Technology
 Enabling communication and response between key systems on your  mower with defined operation modes, system monitoring and clutch saver  features.
 
UltraCut Series 6 Deck UltraCut Series 6 Deck
 This full-floating deck uses double-row bearings with a splined blade driver  to stop bolt tightening on impacts. And, our patented bearing design on  idler arm pivots only needs annual service.
 
A New Level of Comfort A New Level of Comfort
 Comfort increases productivity. That’s why we designed a new,  ergonomically advanced seat system featuring our exclusive Iso-Mount Seat  Isolation System.
 
Productivity Productivity
 Higher ground speeds with 16cc drive system and more power with larger  engine displacements for improved productivity.
 
Tool-less Belt Removal Tool-less Belt Removal
 Deck and hydro belt can be installed without using any tools.

Specifications for model # LZX740EKC526T0

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.00" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Width / Cutting Deck 52"
Dimensions
Height 70 in. (177.8 cm)
Length 79.2 in. (201.2 cm)
Width 64.8 in. (164.6 cm)
Curb Weight 1116
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 9.5-12, 4 ply Turf Master®
Electrical 12-volt battery with 25-amp alternator.
Front Caster Tires 13 x 5.0-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model ECV740
Engine Series Command™ EFI
Engine Speed 3,650 rpm
Engine Type Electronic Fuel Injected
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop Electromagnetic 200-ft-lbs clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas EFI

Specifications for model # LZX801GKA60600

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight 1215
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 852
Engine Model FX801V
Engine Series V-Twin
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop Electromagnetic 200-ft-lbs clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Fuel Type Gas Carbureted

Specifications for model # LZX940EKC606T0

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight 1264
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm(1.18")diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Electrical 12-volt battery with 25-amp alternator.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 999
Engine Model ECV940
Engine Series Command™ EFI
Engine Speed 3,650 rpm
Engine Type Electronic Fuel Injected
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Fuel Type Gas EFI

Specifications for model # LZX980EKC726T0

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 24.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Width / Cutting Deck 72"
Dimensions
Height 70 in. (177.8 cm)
Length 86.1 in. (218.7 cm)
Width 84.9 in. (215.6 cm)
Curb Weight 1276
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Electrical 12-volt battery with 25-amp alternator.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 999
Engine Model ECV980
Engine Series Command™ EFI
Engine Speed 3,650 rpm
Engine Type Electronic Fuel Injected
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Fuel Type Gas EFI

Specifications for model # LZX801GKA606B1

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height
Length 83.1 in. (211.1 cm)
Width 72.8 in. (184.9 cm)
Curb Weight
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Seat Isolation System for reduced vibration, to enhance ride of standard seat.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
Air Filter Heavy-duty canister air filtration system
Carb Compliant No
Casters .50" thick caster yoke arms.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kawasaki®
Engine Displacement 852
Engine Model FX801V
Engine Series V-Twin
Engine Speed 3,750 rpm
Engine Type Carbureted
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
PTO Engagement MagStop Electromagnetic 200-ft-lbs clutch with spot brake
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Fuel Type Gas Carbureted

Contact Us About This Lazer Z X-Series

†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.