Exmark Pioneer S-Series Zero-Turn Lawn Mowers
Exmark Pioneer S-Series Zero-Turn Lawn Mowers


Features & Specs

  • Superior Air Filtration
  • Rear Discharge Deck (60")
  • Maintenance-Free Spindles
  • Commercial Grade Deck
  • Productivity
  • Suspension Seat
Available Deck Sizes:

Make
Exmark
Model Pioneer S-Series
Engine Power 725 cc/747 cc
Engine Kohler
Drivetrain Hydro-Drive
Fuel Capacity 7 gallons
Operating Speed 0-8.0 mph forward/0-5.0 mph reverse
Mowing Height Range 1.5" - 5.0" in 0.25" increments
Warranty 1 year limited
Average Rating
Please Call For Pricing
407-240-1023

Variations

48 inch deck
Kohler 725 cc Gasoline Engine
PNS710GKC48300
See All Specs
52 inch deck
Kohler 725 cc Gasoline Engine
PNS720GKC52300
See All Specs
60 inch deck
Kohler 747 cc Gasoline Engine
PNS740GKC604A4
See All Specs
60 inch deck
Kohler 747 cc Gasoline Engine
PNS740GKC60RA3
See All Specs


Pioneer S-Series

Proof that value and performance are not mutually exclusive. 

The Pioneer S-Series gives lawn care professionals even more to like. The 48- and 52-inch models receive the patented UltraCut™ Series 3 deck system. And the 60-inch gets the UltraCut Series 4, the same deck used on our Lazer Z® S-Series mower, featuring heavy-duty cutter housings and a deeper deck for increased productivity. The S-Series also gives you the choice of a ZT3100 (on 48”–52”). The 60” models ZT3400 integrated transmission provide a seriously smooth ride. Can also reach speeds up to 9 mph, which results in maximum productivity. Comes equipped with the full-suspension seat which enhances operator comfort. Not available in CA.


Efficient Fueling Superior Air Filtration
 This series comes standard with heavy-duty canister air filtration systems for  longer engine life, more efficient performance and simple maintenance.
 
Rear-Discharge Deck Rear-Discharge Deck (60")
 Allows for increased productivity while mowing around trees, buildings and  landscape, as well as more controlled discharge clippings to help keep the  operator clean.
 
Maintenance-Free Spindles Maintenance-Free Spindles
 Commercial-grade, cast aluminum spindles feature sealed bearings to resist  damage from moisture and impact, with no annual greasing required.
 
Commercial Grade Deck Commercial Grade Deck
 UltraCut™ Series 3 and 4 decks
 
 Productivity
 The S-Series can reach speeds up to 9mph* covering up to 5.5 acres per hour.  *Based on the PNS740GKC60400 model.
 
Comfort Counts Comfort Counts
 The Pioneer features a bolstered seat with coil-spring suspension. Because  operator comfort and productivity go hand-in-hand.

Specifications for model # PNS710GKC48300

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 16.25" Length
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 48"
Dimensions
Height 72 in. (183 cm)
Length 78 in. (198 cm)
Width 60 in. (152 cm)
Curb Weight 862
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 22 x 9.5-12 Super Turf®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth tread, pneumatic.
Parking Brake Lever-actuated pawl brake.
Seat Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position.
Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment.
Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel.
Power Components
Air Filter Cyclonic Air Cleaner
Carb Compliant No
Casters .38" thick caster yoke arms
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Hydro Gear ZT3100 hydrostatic transmission with charge pumps, relief valves, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 725
Engine Model ZT710
Engine Series Confidant™
Engine Speed 3,700 rpm
Engine Type Carbureted
Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator None
PTO Engagement MagStop electromagnetic 175-ft-lb clutch
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # PNS720GKC52300

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.00" Length
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Dimensions
Height 72 in. (183 cm)
Length 78 in. (198 cm)
Width 65 in. (165 cm)
Curb Weight 868
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 22 x 9.5-12 Super Turf®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth tread, pneumatic.
Parking Brake Lever-actuated pawl brake.
Seat Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position.
Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment.
Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel.
Power Components
Air Filter Cyclonic Air Cleaner
Carb Compliant No
Casters .38" thick caster yoke arms
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Two Hydro Gear ZT3100 hydrostatic transmission with charge pumps, relief valves, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 725
Engine Model ZT720
Engine Series Command™
Engine Speed 3,700 rpm
Engine Type Carbureted
Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator None
PTO Engagement MagStop electromagnetic 175-ft-lb clutch
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # PNS740GKC604A4

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, deck-lift system.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 60"
Dimensions
Height 72 in. (183 cm)
Length 79 in. (200.2 cm)
Width 73 in. (185 cm)
Curb Weight 948
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 10.5-12 Super Turf®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 5.0-6, smooth tread, pneumatic.
Parking Brake Lever-actuated pawl brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Hinged mounting. Adjustment: Fore and aft from Operators’ Position.
Steering Control Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3 height positions.
Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel.
Power Components
Air Filter Cyclonic Air Cleaner
Carb Compliant No
Casters .38" thick caster yoke arms
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model ZT740
Engine Series Command™
Engine Speed 3,700 rpm
Engine Type Carbureted
Fuel Capacity 7-gallon (26.5.-L) single fuel tank.
Fuel Indicator None
PTO Engagement MagStop electromagnetic 200-ft-lb clutch
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–9.0 mph (14.5kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Specifications for model # PNS740GKC60RA3

Decks
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 20.50" Length
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position via foot-operated, deck-lift system.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Width / Cutting Deck 60"
Dimensions
Height 72 in. (183 cm)
Length 80.8 in (205.2 cm)
Width 66.2 in. (168.1 cm)
Curb Weight 842
Equipment
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Cup Holder Standard
Drive Tires 23 x 10.5-12 Super Turf®
Electrical 12-volt battery with 15-amp alternator.
Front Caster Tires 13 x 6.50-6, smooth tread, pneumatic.
Parking Brake Lever-actuated pawl brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Hinged mounting. Adjustment: Fore and aft from Operators’ Position.
Steering Control Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3 height positions.
Tractor Frame Unibody, welded, heavy-duty 2" square tublar steel.
Power Components
Air Filter Cyclonic Air Cleaner
Carb Compliant No
Casters .50" thick caster yoke arms
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive Hydro-Drive
Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Drive Wheel Release Allows unit movement without engine running.
Engine Brand Kohler®
Engine Displacement 747
Engine Model ZT740
Engine Series Confidant™
Engine Speed 3,700 rpm
Engine Type Carbureted
Fuel Capacity 7-gallon (26.5.-L) single fuel tank.
Fuel Indicator None
PTO Engagement MagStop electromagnetic 200-ft-lb clutch
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Speed Infinitely variable speed selection from 0–9.0 mph (14.5kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Fuel Type Gas Carbureted

Contact Us About This Pioneer S-Series

†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.