|Engine Power||22 hp|
|Drivetrain||Two Pedal Hydrostatic|
|Deck Size||48 inch deck|
|Turning Radius||18 in.|
|Chassis Frame||Full-length welded steel|
What's inside the new E150 is impressive. There's the quality of cut. The kind you get with three sharp, grass-processing blades in a solid-stamped, 48-in. mower deck. Just what you'd expect from a John Deere of this caliber. The large steering wheel makes maneuvering easy and the ride a pleasure. Other features include a fully welded steel frame, dent-resistant hood, and a cast-iron front axle. And that all adds up to legendary John Deere durability.
The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:
The contoured dash has clean, attractive styling:
Side-by-side foot pedals control the speed and direction of travel:
Cruise control is available on the E120, E130, E150, E160, E170, and the E180:
A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:
The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.Electric power take-off (PTO) clutch is easy and convenient to use
The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.
A large, easy-to-see reverse implement option (RIO) button is convenient to use when mowing in reverse is desired.
The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as twisting on a new oil-filled filter. Oil does not need to be drained from the engine. The removed filter contains the captured contaminants and a portion of the engine oil.
The John Deere Easy Change filter is an additional engine oil reservoir. Changing the filter removes the captured contaminants and replaces about 0.8 qt (0.76 L) of engine oil. Compared to the 100 Series traditional oil filter, the Easy Change oil system uses a synthetic filter media material, has more filtering capacity and more oil flow capacity, and the engine system has 40 percent more oil volume.
Everyone who uses the John Deere Easy Change system saves time and avoids the mess of a traditional oil change. In the past, many 100 Series Lawn Tractor owners rarely or never got around to changing their engine oil. With John Deere Easy Change, even owners who previously would not consider changing the oil themselves can easily do it now. The Easy Change 30-second oil change system is a no-mess, no-fuss solution the competition cannot match.
Installation instructions are in the Operatorĺs Manual and in the John Deere Easy Change service part box.
Please recycle. Many local government recycling programs, authorized retailers, auto-service centers, and auto-parts stores will puncture and recycle used oil filters and oil.
The front axle is constructed of solid cast iron that will not bend:
An exclusive 2-year or 120-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere 100 Series Tractors.
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.Hydrostatic transmission gives an infinite choice of ground speeds
A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:
Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:
An easy-to-use cruise control option maintains the tractor's speed for mowing larger areas:
NOTE: Cruise control is available on all models except the E100, E110, and E140.
Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.Engine is powerful and smooth-running V-twin design
A 22-hp (16.4-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as removing the old oil-filled filter and twisting on a new oil-filled filter. Oil does not need to be drained from the engine. The removed filter contains the captured contaminants and a portion of the engine oil. Easy Change is standard equipment on the E120, E130, E150, E160, E170, and E180.The Edge™ cutting system gives superior performance
The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give superior convenience, performance, and reliability:
The 48-in. (121.9-cm) Edge mower deck is a three-spindle design with heavy-duty characteristics:
The mower deck has a rolled lip to provide greater strength and protection. The rugged 12-gauge, 0.105-in. (2.7-mm) steel-deck mower will provide years of dependable mowing.
The blade-to-spindle design provides a unique mounting system for the mower blade that gives extra safety and convenience.
A cut-and-throw, 6.5-bu (229-L) rear bagger is sold separately and comes with bagging blades.
A wash port is provided to make cleaning the underside of the mower deck easy:
The StarLock blade design keeps the blade bolt at the correct torque for easy removal.
Optional blades for difficult mulching or bagging conditions are available.
A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:
The operator station is designed for operator comfort and easy operation:
Controls are easy to see and use:
Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:
The operator seat has a 15-in. (38.1-cm) back height for good support. It is especially helpful when operating the tractor for extended periods of time.
It can be easily adjusted forward or rearward while in the seat, with seat travel of 5.5 in. (14 cm) and 10 different positions.
Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.
The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.
A beverage holder and storage compartment, located on the right side fender, are conveniently located and easy to use.
Fender flares cover the tires more completely and add style to the tractor.
The one-piece hood opens easily to permit checking and servicing the engine:
The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as removing the old oil-filled filter and twisting on a new oil-filled filter. Oil does not need to be drained from the engine. The removed filter contains the captured contaminants and a portion of the engine oil.
The seat tilts up and out of the way to make adding fuel easy.
The 100 Series Tractors are covered by a 2-year/120-hour bumper-to-bumper warranty*:
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
|´┐ŻJohn Deere E150 Lawn Tractor´┐Ż|
|Displacement||44.2 cu in.
|Type||Overhead valve, full-pressure lube, oil filter|
|Choke/speed control||One lever, ReadyStart´┐Ż|
|Oil drain||No tools|
|Fuel delivery||Pulse pump and carburetor|
|Fuel gauge||Mechanical, viewable from seat|
|Fuel tank location||Rear|
|Fuel fill opening||Center, 1.75 in.
|Fuel tank capacity||2.4 U.S. gal.
|Charging system||Regulated, 9 amp|
|Engine starter||Bendix type|
|Hourmeter||Yes, with service reminder|
|Headlights||Two standard, incandescent|
|Taillights or reflector||No|
|Rear work lights||No|
|12-V outlet||Optional accessory|
|Type||Hydrostatic, 2-wheel drive|
|Control||Two-pedal foot-controlled hydrostatic|
|Oil cooler||Fins and fan on transaxle|
|Oil filter||Yes, not serviceable|
|Forward speed||0-5.5 mph
|Reverse speed||0-3.2 mph
|Brakes||Internal wet disk|
|Frame||Full-length welded steel|
|Weight bracket||Optional rear|
|Front axle||Cast-iron front axle, powdered-metal front wheel bushings|
|Hood material||JD Loy, UV resistant|
|Fender deck material||Stamped steel|
|Floor mats||Yes, with debris removing channels|
|Storage||Storage tray with cover|
|Service interval decal||Yes|
|Equipment mounting||CargO Mount´┐Ż system|
|Type||Sector and pinion with single drag link and tie rod|
|All-wheel steer||Not available on this model|
|Steering wheel||Standard, diameter - 12 in.
|Tilt steering wheel||No|
|Turning radius||18 in.
|Uncut circle radius||20 in.
|Seat back height||15 in.
|Fore-aft adjustment||While seated, 5.5 in.
|Seat suspension||Tilt, two coil springs|
|Type||Lever on fender deck|
|Mower cut height||13 positions, 1-4 in.
|Cut height increments||0.25 in.
|Preset cut height||No|
|Cutting width||48 in.
|Construction||Stamped steel deck shell|
|Mower deck material||Steel, 12 gauge
|Mower wash port||Yes|
|Mower drive system||Electric power take-off (PTO) clutch|
|Mower wheel adjustment||One bolt|
|Mower level adjustment||Easy-level deck|
|Type||Slide under tractor|
|Front draft arms||One spring clip|
|Rear draft arms||Two pins and spring clips|
|Mower wheels rotate||No|
|Drive system||Single belt|
|Meets ANSI standard||Yes|
|Meets OPEI standard||Yes|
|Backup protection||Reverse Implement Option (RIO)|
|Notes||JD Loy hood resists fading, won't rust or dent
Durable primer and powder paint f
|Warranty||2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whic|
|Mowers||Standard, 48 in.
|Rear bagger||2-bag, 6.5 bu
|Powered material collection|
|Mulching system||Mulch cover|
|Front blade||46 in.
|Snow blower||Two-stage, 44 in.
|Rear power take-off (PTO)|
|Sprayer||Tow-behind, 15 U.S. gal.
Mounted, 15 U.S. gal.
Tow-behind only, 25 U.S.
|Spreader||Tow-behind only, 125-175 lb
|Front bumper||Two-bar styled front bumper|
|Weather protection||Snow cab|
|Rear receiver hitch|
|Bucket holder||Yes, single bucket|
|Grass striping||Lawn striping kit|
|Overall length||69.5 in.
|Width with mower||60.8 in.
|Width with mower (deflector raised for||50 in.
|Width without mower|
|Weight||Mower, no fuel, 483 lb
*Call for details on 0% Financing.
†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.