John Deere 1025R Sub-Compact Utility Tractor
John Deere 1025R Sub-Compact Utility Tractor


0% Financing Available
Image is representative. Price does not include any attachments.

Features & Specs

  • Powerful Tier 4-compliant diesel engine
  • New, easy-lift hood with dual gas-charged lift struts
  • Premium Operator Station with ergonomic seat, armrests and fender lights
  • Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes
Make
John Deere
Model 1025R
Engine Power 23.9 hp (17.8 kW)
Drivetrain Hydrostatic, 2-range
Three Point Hitch Category 1
Wheelbase 57.1 in (1,450 mm)
Average Rating
$ 13,561.00
Price is for base model. Please call or stop by a store to customize your order.


1025R


Meet the most capable sub-compact tractors on the market: the John Deere 1 Family. With up to 25 available horsepower, AutoConnect™ decks, iMatch™ compatibility, not to mention hundreds of implement and attachment options...even the hardest chore on your list doesn't stand a chance.


Key Features
Open operator's station is comfortable and convenient
Optional iMatch™ Quick-Hitch allows for easy implement hookup
Fast and easy implement changeover
Easy operation four-wheel drive (4WD) power steering
Powerful Tier 4-compliant diesel engine and standard dual mid-selective control valve (SCV)
Hydrostatic transmission (HST) with Twin Touch™ foot controls
Implement compounding improves efficiency
Durable, efficient, high-torque 3-cylinder diesel engine
Easy-open, gas-lift hood
Operator Station and Controls 
12-V outlet
Beverage holder
Mower deck height-adjustment knob
Open operator's station is comfortable and convenient
Suspension seat
Tilt steering
Tool storage
Steering and Brakes 
Spur gear final drive and wet-disc brakes
Power steering
Transmission
Hydrostatic transmission (HST) with Twin Touch™ foot controls
Hitch, Drawbar, and PTO
3-point hitch
Hitch plate
Optional iMatch™ Quick-Hitch allows for easy implement hookup
Mid and rear power take-off (PTO)
Power take-off (PTO) operation
Engine 
Durable, efficient, high-torque 3-cylinder diesel engine
Differentials, Axles, Frame, and Chassis
Differential lock
Four-wheel drive (4WD) is standard
Hydraulics
Open Center hydraulic system
Manufacturer John Deere
Model 1025R (2015)
ENGINE  
Family  EYDXL1.27NS1 or FYDXL1.27NS1  
Manufacturer  Yanmar  
Engine model  3TNV80F-NCJT  
Engine power (gross)  17.8 kW 
 24.2 hp 
 PS  
 SAE J1995 rated power  
Power take-off (PTO) power  13.4 kW 
 18 hp 
Rated engine speed  3200 rpm 
Type  Diesel  
Injection pump type  Indirect Injection  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.267 L 
 3 / 77.3 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  76x82 mm 
 2.99x3.23 in. 
Compression ratio  23.0:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element with mechanical restriction indicator  
Engine torque at rated speed  55.2 Nm 
 40.7 lb-ft 
Fuel tank capacity  21.2 L 
 5.6 U.S. gal. 
ELECTRICAL  
Battery size  500 CCA 
Alternator (12-V)  40 amp 
Starter size  1.2 kW 
 1.6 hp 
FUEL SYSTEM  
Type  Indirect Injection  
Fuel consumption  5.3 L/hr 
 1.4 U.S. gal./hr 
*Fuel consumption rate should be used for comparison purposes only  ---  
TRANSMISSION  
Standard transmission; forward/reverse  Hydrostatic - 2 range  
Optional transmission; forward/reverse  ---  
Left-hand reverser  No  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc (left-hand pedal)  
Steering  Power  
Clutch, wet/dry  N/A  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
     Front  612 kg 
 1349 lb 
     Rear  715 kg 
 1576 lb 
Creeper  No  
Cruise control  Standard  
Differential lock  Yes  
Maximum loads drawbar  ---  
Vertical  ---  
HYDRAULICS  
Type  Open center  
Pump rated output  24 L/min 
 6.3 gpm 
     Steering  10.8 L/min 
 2.8 gpm 
     Implement  13.2 L/min 
 3.5 gpm 
Pump type  Gear  
Maximum operating pressure  137.9 bar 
 2000 psi 
Draft control sensing  Position control  
Remote control valves available  Two  
3-POINT HITCH  
Category  Limited Category 1  
Lift capacity, 24-in. behind link arms  309 kg 
 681 lb 
Lift capacity at lift link ends  525 kg 
 1157 lb 
POWER TAKE-OFF (PTO)  
Standard  Rear - 540 rpm 
 Mid - 2100 rpm 
Optional  ---  
Control  Independent  
Clutch  Wet disc  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  ---  
FLUID CAPACITIES  
Crankcase with filter  3.7 L 
 3.9 qt 
Transmission and Hydraulic System  3.25 gal.  
 12.3 L 
FINAL DRIVE  
Type  Bull Gear  
Differential lock  Yes  
OPERATOR STATION  
Rollover protective structure  Yes  
     Type  Foldable  
Platform - flat/straddle  One-piece semi flat  
Gear shift location - console/floor  Left-hand side  
CAB  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
DIMENSIONS  
Wheelbase  145 cm 
 57.1 in. 
Front axle clearance  195 mm 
 7.7 in. 
Turning radius with brakes  ---  
Turning radius without brakes  2.25 m 
 7.4 ft 
Limited slip differential  No  
Approximate shipping weight (open-station; cab)  655 kg 
 1444 lb 
TIRES  
Front  R4 - 18x8.5-10  
Rear  R4 - 26x12-12  
Front tread range  91.8 cm 
 36.1 in. 
Rear tread spacing  ---  
MISCELLANEOUS  
Toolbox  Yes  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---  
Specifications are based on published information at the time of publication. Specifications are subject to change without notice.
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

Contact Us About This 1025R

*Call for details on 0% Financing.

†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.