John Deere 2025R Compact Utility Tractor
John Deere 2025R Compact Utility Tractor


0% Financing Available
Image is representative. Price does not include any attachments.

Features & Specs

  • 25 horsepower liquid-cooled diesel engine
  • Drive-over mower decks up to 62 inches
  • Standard 4WD, cruise control, folding ROPS
  • iMatch™ and AutoHitch ™compatible
Make
John Deere
Model 2025R
Engine Power 24.2 hp (17.8 kW)
Drivetrain Hydrostatic, 2-range
Three Point Hitch Category 1
Wheelbase 63 in (1,600 mm)
Average Rating
$ 16,398.00
Price is for base model. Please call or stop by a store to customize your order.


2025R


Big tractor features meet easy to use performance in the new John Deere 2 Family Compact Utility Tractors. Choose from two 2R Series tractors with up to 32 available horsepower. Enjoy standard four wheel drive (4WD), cruise control, folding ROPS, drive-over mower decks and Quik-Park™ loaders. Plus, iMatch™ and AutoHitch™ compatibility means implement swapping in seconds.


Key Features 
Yanmar® diesel engine
Hydrostatic transmission
Optional iMatch™ Quick-Hitch allows for easy implement hookup
Easily change PTO-driven implements with iMatch™ AutoHitch™
Open operator's station
Hydraulics
Open-center hydraulic system
Differentials, Axles, Frame, and Chassis 
Differential lock
Four-wheel drive (4WD) is standard
Engine 
Yanmar® diesel engine
Transmission 
Cruise control
Hydrostatic transmission
Hitch, Drawbar, and PTO 
3-point hitch
Drawbar
Optional iMatch™ Quick-Hitch allows for easy implement hookup
Mid and rear PTO
PTO operation
Easily change PTO-driven implements with iMatch™ AutoHitch™
Steering and brakes
Final drive and brakes
Power steering
Operator Station and Controls 
Mid-mower deck lift systems
Mower deck height-adjustment knob (2025R)
Open operator's station
Standard folding ROPS
Manufacturer John Deere
Model 2025R Compact Utility Tractor (2015)
ENGINE  
Family  EYDXL1.27NS2 or FYDXL1.27NS2  
Manufacturer  Yanmar  
Engine model  3TNV80F-NDJK  
Engine power (gross)  17.8 kW 
 23.9 hp 
 SAE J1995 rated power  
Power take-off (PTO) power  14.5 kW 
 18 hp 
Rated engine speed  3000 rpm 
Type  Diesel  
Injection pump type  Indirect Injection  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.267 L 
 3 / 77.3 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  80x84 mm 
 3.15x3.31 in. 
Compression ratio  23.1:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element  
Engine torque at rated speed  54.6 Nm 
 40.27 lb-ft 
Fuel tank capacity  23 L 
 6.1 gal. 
ELECTRICAL  
Battery size  500 CCA 
Alternator (12-V)  40 amp 
Starter size  1.2 kW 
 1.6 hp 
FUEL SYSTEM  
Type  Indirect Injection  
Fuel consumption  6.1 L/hr 
 1.6 U.S. gal./hr 
*Fuel consumption rate should be used for comparison purposes only  ---  
TRANSMISSION  
Standard transmission; forward/reverse  Hydrostatic - 2 range  
Optional transmission; forward/reverse  ---  
Left-hand reverser  No  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
     Front  880 kg 
 1940 lb 
     Rear  1100 kg 
 2426 lb 
Creeper  No  
Cruise control  Standard  
Differential lock  Yes  
Maximum loads drawbar  ---  
     Vertical  ---  
HYDRAULICS  
Type  Open center  
Pump rated output  21.2 L/min 
 5.6 gpm 
Steering  8.5 L/min 
 2.2 gpm 
Implement  12.7 L/min 
 3.4 gpm 
Pump type  Gear  
Maximum operating pressure  166.9 bar 
 2421 psi 
Draft control sensing  Position control  
Remote control valves available  Two  
3-POINT HITCH  
Category  Category 1  
Lift capacity, 24-in. behind link arms  522 kg 
 1150 lb 
Lift capacity at lift link ends  650 kg 
 1433 lb 
POWER TAKE-OFF (PTO)  
Standard  Rear - 540 rpm, Mid - 2100 rpm 
Optional  ---  
Control  Independent  
Clutch  Wet disc  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  ---  
FLUID CAPACITIES  
Crankcase with filter  3.2 L 
 3.4 qt 
Transmission and hydraulic system  ---  
FINAL DRIVE  
Type  Bull Gear  
Differential lock  Yes  
OPERATOR STATION  
Rollover protective structure  OSHA, SAE, ASAE  
     Type  Foldable  
Platform - flat/straddle  Flat  
Gear shift location - console/floor  Left-hand side  
CAB  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
DIMENSIONS  
Wheelbase  160 cm 
 63 in. 
Front axle clearance  318.4 mm 
 12.5 in. 
Turning radius with brakes  2.04 m 
 6.7 ft 
Turning radius without brakes  2.34 m 
 7.7 ft 
Limited slip differential  No  
Approximate shipping weight (open-station; cab)  753 kg 
 1660 lb 
TIRES  
Front  Turf - 23x8.50-12  
 R4 - 23x8.50-12 
Rear  Turf - 31x13.5-15  
 R4 - 12-16.5  
Front tread range  95.3 cm 
 37.5 in. 
Rear Tread Spacing  ---  
MISCELLANEOUS  
Toolbox  No  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---  
Specifications are based on published information at the time of publication. Specifications are subject to change without notice.
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

Contact Us About This 2025R

*Call for details on 0% Financing.

†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.