John Deere 2032R Compact Utility Tractor

John Deere 2032R Compact Utility Tractor

0% Financing Available
Image is representative. Price does not include any attachments.

Features & Specs

  • 32 horsepower liquid-cooled diesel engine
  • Drive-over mower decks up to 62 inches
  • Standard 4WD, cruise control, folding ROPS
  • iMatch™ and AutoHitch™ compatible
John Deere
Model 2032R
Engine Power 31.7 hp (23.3 kW)
Drivetrain Hydrostatic, 2-range
Three Point Hitch Category 1
Wheelbase 65.2 in (1,655 mm)
Please Call For Pricing


Online Only / On Order
St. Cloud
Online Only / On Order


Big tractor features meet easy to use performance in the new John Deere 2 Family Compact Utility Tractors. Choose from two 2R Series tractors with up to 32 available horsepower. Enjoy standard four wheel drive (4WD), cruise control, folding ROPS, drive-over mower decks and Quik-Park™ loaders. Plus, iMatch™ and AutoHitch™ compatibility means implement swapping in seconds.

Key Features 
Open operator's station
Yanmar® diesel engine
Hydrostatic transmission
Optional iMatch™ Quick-Hitch allows for easy implement hookup
Easily change PTO-driven implements with iMatch™ AutoHitch™
Operator Station and Controls 
Mid-mower deck lift systems
Mower deck height-adjustment knob (2025R)
Open operator's station
Standard folding ROPS
Open-center hydraulic system
Differentials, Axles, Frame, and Chassis 
Differential lock
Four-wheel drive (4WD) is standard
Steering and Brakes 
Final drive and brakes
Power steering
Cruise control
Hydrostatic transmission
Hitch, Drawbar, and PTO 
3-point hitch
Optional iMatch™ Quick-Hitch allows for easy implement hookup
Mid and rear PTO
PTO operation
Easily change PTO-driven implements with iMatch™ AutoHitch™
Yanmar® diesel engine
Manufacturer John Deere
Model 2032R Compact Utility Tractor (2016)
Family  EYDXL1.64L3N or FYDXL1.64L3N  
Manufacturer  Yanmar  
Engine model  3TNV88-BNJK1A  
Engine power (gross)  23.3 kW 
 31.6 hp 
 SAE J1995 rated power  
Power take-off (PTO) power  17.5 kW 
 23.5 hp 
Rated engine speed  2500 rpm 
Type  Direct injection  
Injection pump type  Direct Injection  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.642 L 
 3 / 100.2 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  88x90 mm 
 3.46x3.54 in. 
Compression ratio  19.1:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element  
Engine torque at rated speed  85.4 Nm 
 63 lb-ft 
Fuel tank capacity  27 L 
 7.1 U.S. gal. 
Battery size  500 CCA 
Alternator (12-V)  40 amp 
Starter size  1.4 kW 
 1.9 hp 
Type  Direct Injection  
Fuel consumption  5.3 L/hr 
 1.4 U.S. gal./hr 
*Fuel consumption rate should be used for comparison purposes only  ---  
Standard transmission; forward/reverse  Hydrostatic - 2 range  
Optional transmission; forward/reverse  ---  
Left-hand reverser  ---  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
     Front  880 kg 
 1940 lb 
     Rear  1600 kg 
 3528 lb 
Creeper  ---  
Cruise control  Standard  
Differential lock  Yes  
Maximum loads drawbar  ---  
Vertical  ---  
Type  Open center  
Pump rated output  39.6 L/min 
 10.5 gpm 
     Steering  20.8 L/min 
 5.5 gpm 
     Implement  18.8 L/min 
 5.0 gpm 
Pump type  Gear  
Maximum operating pressure  166.9 bar 
 2421 psi 
Draft control sensing  Position control  
Remote control valves available  Up to two  
Category  Category 1  
Lift capacity, 24-in. behind link arms  567 kg 
 1250 lb 
Lift capacity at lift link ends  650 kg 
 1433 lb 
Standard  Rear - 540 rpm, Mid - 2100 rpm 
Optional  ---  
Control  Independent  
Clutch  Wet disc  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  ---  
Crankcase with filter  3.6 L 
 4 qt 
Transmission and hydraulic system  ---  
Type  Bull Gear  
Differential lock  Yes  
Rollover protective structure  OSHA, SAE, ASAE  
     Type  Foldable  
Platform - flat/straddle  Flat  
Gear shift location - console/floor  Left-hand side  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Wheelbase  165.5 cm 
 65.2 in. 
Front axle clearance  279 mm 
 11 in. 
Turning radius with brakes  2.3 m 
 7.5 ft 
Turning radius without brakes  2.5 m 
 8.2 ft 
Limited slip differential  No  
Approximate shipping weight (open-station; cab)  895 kg 
 1973 lb 
Front  Turf - 24x8.50-14  
 R4 - 25x8.5-12  
Rear  Turf - 36x14-15  
 R4 - 14-17.5  
Front tread range  93.5 cm 
 36.8 in. 
Rear tread spacing  104.9 cm 
 41.3 in. 
Toolbox  No  
Tilt steering wheel  ---  
12-V Outlet  Optional  
Date collected  ---  
Specifications are based on published information at the time of publication. Specifications are subject to change without notice.
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

2032R Reviews

Write Your Own Review!

Your review won't show up right away in order to prevent spam.

Contact Us About This 2032R

*Call for details on 0% Financing.

†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.