John Deere 4105 Compact Utility Tractor
John Deere 4105 Compact Utility Tractor


0% Financing Available
Image is representative. Price does not include any attachments.

Features & Specs

  • Yanmar Diesel Engine
  • Hydrostatic Transmission
  • Standard 4-wheel drive
  • Independent PTO
Make
John Deere
Model 4105
Engine Power 40.5 hp (30.2 kW)
Drivetrain HST - 2 range
Three Point Hitch Category 1
Wheelbase 68 in. (1,727 mm)
Average Rating
$ 23,634.00
Price is for base model. Please call or stop by a store to customize your order.


4105


They're quick, compact-and anything but basic. The John Deere 4105 Compact Utility Tractor is built for hard work without the hassle, especially when it comes to loading, mowing and backhoe work. You'll experience standard hydrostatic transmission with no clutching or shifting with the 4105. Plus, the 4105 gives you Twin Touch™ pedals, 4WD and power steering.


Key Features 
Two-range hydrostatic transmission (HST) increases tractor performance
Optional iMatch™ Quick-Hitch allows for easy implement hookup
Operator station is comfortable and convenient
Powerful diesel engine delivers plenty of power under heavy loads
Easily change PTO-driven implements with iMatch™ AutoHitch™
Transmission 
Two-range hydrostatic transmission (HST) increases tractor performance
Twin Touch™ foot controls for maximum comfort and maneuverability
Hitch, Drawbar, and PTO 
Adapt to wide variety of implements with a Category 1 3-point hitch
Standard three-position drawbar for drawn implement hookup
Optional iMatch™ Quick-Hitch allows for easy implement hookup
Standard independent rear power takeoff (PTO) performs well in normal or heavy applications
Easily change PTO-driven implements with iMatch™ AutoHitch™
Electrical and Lighting 
Excellent lighting for 24/7 working conditions
Engine 
Powerful diesel engine delivers plenty of power under heavy loads
Differentials, Axles, Frame, and Chassis 
Get through tough spots using the differential lock
Spur gear final drives ensure durability and performance
Four-wheel drive (4WD) provides maximum traction
Hydraulics 
Hydraulic controls and couplers optimize implement operation
Open-center hydraulic system provides efficient operation
Operator Station and Controls 
Standard two-post Roll-Gard™ ROPS increase operator safety
Easy-to-read instrumentation panel for efficient operation
Operator station is comfortable and convenient
Standard safety features for operator peace of mind
Adjustable high-back seat provides comfort and support
Steering and Brakes 
Hydrostatic power steering for performance and efficiency
Maximum stopping power with wet disk brakes
Manufacturer John Deere
Model 4105 (MY2016)
ENGINE  
Family  CYDXL1.50K3T or DYDXL1.50L3T or EYDXL1.50L3T or FYDXL1.50L3T  
Manufacturer  Yanmar  
Engine model  ---  
Engine power (gross)  30.2 kW  
 41 hp 
 97/68/EC rated power  
Power take-off (PTO) power  24.2 kW  
 32.5 hp 
Rated engine speed  2800 rpm 
Type  Diesel  
Injection pump type  In-line with electric shutoff  
Aspiration  Turbocharged  
Emissions compliance  Tier 4 Interim or Final Tier 4  
Cylinders/displacement  3 / 1.496 L  
 3 / 91.3 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  84 x 90 mm 
 3.3 x 3.54 in. 
Compression ratio  19:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element with electronic restriction indicator  
Engine torque at rated speed  80.3 Nm 
 59.2 lb-ft 
Fuel tank capacity  39.7 L 
 10.5 U.S. gal. 
ELECTRICAL  
Battery size  500 CCA 
Alternator (12-V)  40 amp 
Starter size  1.4 kW 
 1.9 hp 
FUEL SYSTEM  
Type  Direct injection  
Fuel consumption  8.9 L/hr 
 2.35 U.S. gal./hr 
*Fuel consumption rate should be used for comparison purposes only  ---  
TRANSMISSION  
Standard transmission; forward/reverse  Hydro, 2-Range  
Optional transmission; forward/reverse  ---  
Left-hand reverser  No  
Transmission gear ranges  ---  
Final drive  Planetary  
Brakes  Wet disk  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
     Front  720-1450 kg 
 1587-3197 lb 
     Rear  1815 kg 
 4000 lb 
Creeper  No  
Cruise control  Optional  
Differential lock  Yes  
Maximum loads drawbar  ---  
Vertical  ---  
HYDRAULICS  
Type  Open Center  
Pump rated output  56.2 L/min 
 14.8 gpm 
     Steering  21.6 L/min 
 5.7 gpm 
     Implement  34.7 L/min 
 9.2 gpm 
Pump type  Dual gear  
Maximum operating pressure  2500 psi 
Draft control sensing  Position control  
Remote control valves available  2  
3-POINT HITCH  
Category  Category 1  
Lift capacity, 24-in. behind link arms  999 kg 
 2200 lb 
Lift capacity at lift link ends  1149 kg 
 2530 lb 
POWER TAKE-OFF (PTO)  
Standard  Rear @ 540 rpm 
Optional  ---  
Control  Independent  
Clutch  Wet disk  
Brake (for mid and rear PTO)  N/A  
Engagement method  ---  
FLUID CAPACITIES  
Crankcase with filter  4.3 L 
 4.5 qt 
Transmission and Hydraulic System  25.7 L 
 6.8 U.S. gal. 
FINAL DRIVE  
Type  Planetary  
Differential lock  Yes  
OPERATOR STATION  
Rollover protective structure  ASAE S478  
     Type  Rigid  
Platform - flat/straddle  Semi-flat  
Gear shift location - console/floor  Left Side  
CAB  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
DIMENSIONS  
Wheelbase  1727 mm 
 68 in. 
Front axle clearance  373 mm 
 14.7 in. 
Turning radius with brakes  ---  
Turning radius without brakes  2.89 m 
 9.5 ft 
Limited slip differential  ---  
Approximate shipping weight (open-station; cab)  1355 kg 
 2987 lb 
TIRES  
Front  10-16.5 R4 / 8-16 R1 - MFWD  
Rear  17.5L-24 R4 / 14.9-24 R1 - MFWD  
Front tread range  ---  
Rear tread spacing  ---  
MISCELLANEOUS  
Toolbox  ---  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---  
Specifications are based on published information at the time of publication. Specifications are subject to change without notice.
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted.

Contact Us About This 4105

*Call for details on 0% Financing.

†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.