Make |
John Deere
|
Model | Z925M EFI |
Engine Power | 24.6 hp (18.3 kW) |
Drivetrain | Hydrostatic |
Fuel Options | Electronic Fuel Injection |
Seat | 3 options, deluxe seat standard |
Warranty | 2-year/unlimited hour, 3-year/1200-hr bumper-to-bumper |
Manufacturer | John Deere |
Model | Z925M EFI (2016) |
ENGINE | |
Manufacturer | --- |
Model No. | ECV740 |
Horsepower (gross) | At 3600 rpm 25.0 hp |
18.6 kW | |
Displacement | 45.6 cu in. |
747 cc | |
Cylinders | Two |
Crankcase Capacity | With filter 2.0 U.S. qt |
1.9 L | |
Oil Filter | Full flow, replaceable |
Lubrication | Full pressure |
Cooling | Air |
Air Cleaner | Heavy-duty canister type with safety element |
Pre-Cleaner | Yes |
FUEL SYSTEM | |
Fuel Type | Gasoline |
Fuel Consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr |
4.2-7.2 L/hr | |
Fuel Tank Capacity | 11.5 U.S. gal. |
43.5 L | |
Fuel Tank Switch/Shut Off Valve | Yes |
ELECTRICAL SYSTEM | |
Charge System | 20 amp |
Battery Voltage | 12 V |
Cold Cranking Amp | 300 amp |
Hour Meter | Standard, digital |
Operator Presence Starting System | Brake-N-Go (hand) |
DRIVETRAIN | |
Hydraulic Pumps | Tuff Torq® heavy-duty integrated piston pump |
Wheel Motors | Tuff Torq® heavy-duty integrated piston wheel motor |
Travel Speed | --- |
Forward | 0-10 mph |
0-16.1 km/h | |
Reverse | 0-4.5 mph |
0-7.2 km/h | |
Speed and Direction Control | Twin levers |
Hydraulic Capacity | 5.9 U.S. qt |
5.6 L | |
Hydraulic Oil Cooler | --- |
Filter | Internal, replaceable |
TIRES | |
Drive Tires | 24x9.5-12 turf (48 in.), 24x12-12 turf (54 in., 60 in.) |
Load Rating | 4 PR |
Rear Tires | |
BRAKES | |
Dynamic Braking | Twin levers |
Park Brake | Internal wet disk integrated in the transmission |
Park Brake Actuation | Hand brake |
PTO | |
Type | Electro-magnetic 225 lb-ft |
305 Nm | |
Drive | V-belt |
MOWER DECKS | |
Available Widths | 48, 54, 60 in. |
122, 137, 152 cm | |
Deck construction | One-piece stamped steel w/reinforcements |
Deck thickness | 7 gauge |
0.179 in. | |
4.6 mm | |
Discharge | Side |
Height-of-Cut Range | 1.0-5.5 in. |
2.54-14 cm | |
Increments | 0.25 in. |
0.64 cm | |
Cutting Width | 48, 54, 60 in. |
122, 137, 152 cm | |
BLADES | |
Length | Varies by deck size |
Thickness | 0.25 in. |
0.64 cm | |
Tip Speed | Approximately 18,000 fpm |
5486 m/min | |
Number | Three |
WHEELS | |
Caster Wheel Type | Semi-Pneumatic Front |
Caster Wheel Size | 13x6.5-6 |
Front Anti-Scalp Rollers | RH, center, LH |
Rear Anti-Scalp Rollers | Optional |
DIMENSIONS | |
Length | 84 in. |
213 cm | |
Width | With chute down 68, 74 in. |
173, 188 cm | |
Height | With ROPS up 73 in. |
185 cm | |
With ROPS down 47 in. | |
119 cm | |
Weight | 1188 to 1300 lb |
539 to 590 kg | |
Specifications are based on published information at the time of publication. Specifications are subject to change without notice. | |
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence.All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company,unless otherwise noted. |
*Call for details on 0% Financing.
†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.