STIHL TS 410 STIHL Cutquick Cut-off Machines

STIHL TS 410 STIHL Cutquick Cut-off Machines


Features & Specs

-
Make
STIHL
Model TS 410 STIHL Cutquick
Available for In Store Pickup Only
Call or Come in to see if we have any promotional discounts on Stihl equipment.
Price may vary based on available options.


TS 410 STIHL Cutquick

The TS 410 is a lean, clean, cut-off machine that’s easy to use and easier to maintain. Just squeeze the trigger and watch its 12” cutting wheel grind through iron, steel, concrete and expectations. Part of our STIHL Cutquik® series, this model features advanced filter technology that automatically handles daily maintenance. Its revolutionary X2 air filtration removes 99.96% of particles from air entering the carburetor and engine, making its onboard filters virtually maintenance free. Good thing we included an anti-vibration system to maximize comfort – a feature you’ll appreciate after a full day of cutting. NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately.


Reduced Emissions Reduced-Emission Engine Technology - Caring for Nature
 The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more  environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines  “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission  standards.
 
Decompression Valve Decompression Valve
 The decompression valve reduces the compression in the combustion chamber during  cranking and helps reduce the effort needed to pull the starter rope.
 
IntelliCarb IntelliCarb™ Compensating Carburetor
 The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel  ratio when the air filter becomes restricted or partially clogged and maintains the engine’s  correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the  diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the  carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease  in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side  of the air box.
 
Air Filtration System X2 Air Filtration System
 The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air  filters to last up to a year, based on cutting conditions. Outside air enters the system in a  swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed  through the primary and secondary air filters before being sent into the engine. The X2  Air Filtration System is virtually maintenance free and maintains an incredible 99.96%  cleaning efficiency.
Semi-Automatic Belt Tensioning Semi-Automatic Belt Tensioning
 With consistent, semi-automatic re-tensioning, this feature increases the service life of the  belts and shaft bearings.
 
Anti-Vibration System Anti-Vibration System
 STIHL has developed a system for minimizing the vibration levels of handheld outdoor  power equipment. The STIHL anti-vibration system helps reduce operator fatigue and  provides a more comfortable working experience.
 
Ergonomic Grip Ergonomic Grip
 The ergonomic top-handle bar design provides an optimal comfortable grip in any  working position.
TS 410 Stihl Cutquik® Specifications
DISPLACEMENT 66.7 cc (4.07 cu. in.)
ENGINE POWER 3.2 kW (4.4 bhp)
WEIGHT* 9.4 kg (20.7 lbs.)
FUEL TANK CAPACITY 710 cc (24 oz.)
ENGINE SPEED 9,000 rpm (Elec. Gov.)
MAX. SPINDLE SPEED 5,350 rpm
MAXIMUM WHEEL SIZE 300 mm (12")
MAXIMUM CUTTING DEPTH 100 mm (3.9")
POWER SOURCE Gas
*Weight includes water attachment and guard.

TS 410 STIHL Cutquick Reviews

Write Your Own Review!

Your review won't show up right away in order to prevent spam.


Contact Us About This TS 410 STIHL Cutquick

†Some discounts may be available online only. Pricing may vary when purchased in-store. Pricing does not reflect freight, taxes or set-up fees.